Tutorials

How To Find Out Where A Web Page Server Is Located Or Hosted - Quick And Easy

Life on the Internet is not just routine research on a platform. There are millions of things we don't know, there are hundreds if not thousands of processes, commands and elements behind a search . The pages themselves host their servers through technographic processes that help ensure that their platform does not crash.

Knowing where to locate these servers can be difficult at first, but that's okay, we'll show you how. The confidentiality of our activities on the Web is a right not everyone is willing to give up, for security reasons.

Knowing where the servers are hosted will give us a baseline on website security . But in addition to that, protect the computer against possible security and confidentiality failures .

What is a server and a web server?

When we refer to a web server , keep in mind that the terms can be confused. There are servers and web servers, in our case the servers are computers, whose destination is the storage of a wide range of programs , they are then used by other computers.

Yet HTTP protocols , or web servers, are software that use the Hipertext transfer protocol or HTTP, whose job is to store information encompassed by websites, ranging from multimedia, text and others. On top of that, it provides all this information permanently and securely to users on the web and through the browser in which it requested the information.

Locate the server from the command console

We will locate the server of a web page through the command console. We will use for this purpose, two commands, which will be essential to proceed . The commands to use will be the tracert command and the nslookup command.

It's a simple process, you don't need to be an expert in the field and less of a computer teacher. In the search bar, we copy the words CMD, the control console will open . We will first use the Tracert command, which is a diagnostic element that allows us to track or study packets coming from a point in the network.

One can also obtain with the Tracert command, a statistic of the latency of the network of the original packets, which would be clear is a purchase approximate communicating ends of these. We proceed to write the name of the order and follow through them the web address of the page we want to investigate, it is important that we write it completely, without omitting the "www" or the other elements.

Already written, we will enter, we wait and the IP address will be displayed , followed by that, it will show us on the screen the different hops that the process gives to get the information we want, the packets will arrive and continue with the hops will give the DI-USER with the addition ".Com" which means that in order to get the information of the web page, you need to connect to it.

For the nslookup command it would be the same, except the route would not be displayed i.e. hops would not be displayed when viewing packets. This is a command used to find out if DNS positively resolves IP addresses and names. Therefore, it is used to find out the IP address, through the name of the web page. We will repeat the process, as with the previous command.

How to locate the place of accommodation?

To do this, it is necessary to make a geolocation, via the Internet itself, which, supported by the viewing of Google Maps, will allow us to dynamically see the process, and even through satellite vision to trace the origin.

We will take the IP address that the command launched, we will take the page of geolocation tracking most popular , which shows us where information goes before it reaches the hands of users or viewers. It will go through different servers until it reaches the origin server or the parent transmitter.

Similar items

Leave your comment

Your email address will not be published. Required fields are marked with *

Button back to top