How do I correctly install an SSD hard drive on my PC? - Quick and easy
An SSD hard drive can be very useful for you as it will help you increase the performance of your PC. In fact, you can migrate system to SSD with AOMEI Partition Assistant or via other tools. For this reason, we recommend that you read this article with which you will learn How do I correctly install an SSD hard drive on my PC? - Quick and easy
What is an SSD hard drive?
An SSD hard drive is a device used to store data on chips . The technology of this device is based on NAND flash memories and the absence of moving elements which reduce consumption, noise and heat emission.
How find out if your hard drive is a hard drive or an SSD in Windows ? A hard drive has platters that spin. For its part, the SSD hard drive has a particular structure that allows it to be attached to small platters with a different location from traditional hard drives.
What is an SSD hard drive used for?
An SSD hard drive is used for data transfers, increasing the performance of the computer through faster system startup and opening applications. An SSD hard drive automatically reallocates bad sectors using extra memory cells , which contributes to an increased lifespan.
How do I correctly install an SSD hard drive on my PC? - Quick and easy
To commission a PC, it is essential to carry out the correct installation of its components . If you have an SSD hard drive and want to learn how to install it on your computer, pay attention to the procedure that we explain below.
Hardware needed to install an SSD hard drive
To mount an SSD hard drive on your PC, you will have you need these materials: a screwdriver, an antistatic wrist strap, a free power cable (from the power source), and a SATA data cable. With these tools, you can perform the following steps:
Prepare the computer before mounting the SSD hard drive on your PC
First, you need to completely shut down the computer from the operating system or through the switch on the back of the power supply. It's better to unplug the equipment from the outlet de running to prevent damage to components.
Afterwards, it is essential that you use the wrist strap to ground yourself with the equipment. With this tool, you will avoid the passage of electricity which could damage the devices.
Mount the SSD hard drive on your PC
It's time to find the SSD hard drive and connect it to your computer . The assembly process depends on the type of tray. If you have a removable tray, you need to verify that the pins match the four hard drive holes at the bottom. If you have a metal platter, also use the holes to hold the disk.
Connect to the motherboard to properly install an SSD hard drive on your PC
Find it SATA power cable and connect it to motherboard or "motherboard". This connector is characterized by a horizontal L shape. You must take into account the position of the connector to prevent it from breaking. Then connect this cable to the SSD hard drive.
Reconnect the power cord, turn on the computer, and proceed to the SSD hard drive preparation process.
Prepare the SSD hard drive
To prepare the SSD, you need to open the BIOS and verify that the drive has been mounted correctly. Locate the "Boot" section and make sure the first boot device is the hard drive. Save the changes and restart the system to perform a fresh install on this component.
Once you access the system, insert the Manufacturer CD of your SSD hard drive to install. Click the “Install Now” button. Wait a few minutes while the app completes this process. When you notice that your disk performance has dropped, you may optimize the performance of the SSD hard drive in Windows by managing virtual memory.
