How to configure an IP camera to view it remotely from a PC or mobile phone?
Have you ever been in the situation of installing a ip camera in any part of your house or room? With the advancement of time, this has become an essential tool for the safety of many families.
These cameras can be placed in different places in your home where they are strategic surveillance points, and even if you have a webcam, you can also protect and monitor your home . With them you can store different video clips if you want or depending on the model and service, hold live monitoring without needing to store these files .
Among the advantages of these cameras we can highlight the fact that the image of it is of excellent quality and that it can be seen and reproduced from a distance, with the simple fact of making various settings .
In this article, we want to leave you a small tutorial with which you can perform various configurations that will allow you to observe easier your IP cameras à purchase .
Connection to the router begins
Mainly, this tool must be connected to the local network via switch . However, if it is not available or, failing that, it has most of its ports occupied, you have the option to connect it to the IP camera directly with the router
Establish Internet connection
When we have established the connection with the router, you must proceed to connect this connection to Internet . You can do this with the modem cable or by means of connexion special that will give the device direct access to the Internet, with which the connection will also be provided.
Establishing the address connection to the fixed IP address
In order to get the fixed IP address, you must first request it, this is done through an Internet provider. In some cases this action may have an additional cost, for this reason you should check with your FAI . It is important that you save this IP connection in a safe place.
Start by routing the camera to the Internet
When you start routing, this process allows you to link two types of PC networks , the local network and the public network. La ip camera will have an IP address which will not be valid, so you need to make this connexion visible from the Internet. The fastest way to do this is to use a DMZ type setup.
To do this, you need to have access to the configuration of said router, and once inside, you need to locate the section DMZ , depending on the brand of the router, where this configuration will be changed.
When you find this section, you need to enable DMZ and after that enter the IP address of the network camera. Remember that the camera should not have IP adress fixed and cannot use DHCP either.
Establishing the remote connection of the camera
When you have activated the DMZ with the IP adress, you will be able to verify this configuration, simply by using an external PC. To do this, you need to perform a process similar to that used to connect to the IP camera from a local network.
A browser is generally used. To get there, you must enter Internet Explorer , and in the URL section you should place the following: http://YYY.YYY.YYY.YYY
In the section "AND", you need to put the fixed public IP address that was previously provided by the ISP.
With that, everything will be ready. This is known as one of the methods the fastest and most convenient with which you can perform this configuration.
