How to activate or activate the gyroscope on Android Smartphone devices?

0 5.414 3 minutes of reading

In case you didn't know, the proximity sensor is not the only one that you can activate on your mobile , the gyroscope is also a sensor, which is included in cell phones. Its main function is to more effectively detect movements carried out.

This is the technology, it began to be implemented in the models of mobile phones current , which also allow the phone to detect the position they are in, so they can also have a measure of the displacement they are undergoing themselves.

Un tool ideal, when it comes to showing the speed of rotation to which they are subjected. This technology is a cross between an oscilloscope and an accelerometer.

Therefore, it allows the terminal to save the plane in which it is located. We know this might sound a little strange or complicated to you, but it is also the same technology used in the areas of virtual reality or also known as augmented reality, but there are small differences between the two definitions .

It is this type of technology that allows users to enjoy various immersive experiences in multiple mobile games virtual reality, and even watch videos on YouTube with VR glasses or your Android mobile using a special application .

However, this is something that is not available for all models. Since it requires different stages for its maintenance, so as not to lose its proper functioning.

In this article, we want to give you all the necessary steps for you to be able to activate or configure your mobile device's gyroscope.

Steps to activate / deactivate the gyroscope

Among the solutions that exist for this task, it is important that you know that they may vary between models of mobile phones. However, there is one method that works for most Smartphones and it is the one we will show you below.

Start by heading to the phone settings. Once inside, you must enter the option " My devices «.
In the option, it is important that you locate the movements section. You can find it under different names such as: » Movements and gestures " or " movements «. Once you find this option, you just need to tap on it and you will access it as well.
Once inside, you need to start the gyro calibration task. Indeed, since the gyroscope is permanently active, it is important to do so, to keep it in optimal conditions.
The system itself will show you, step by step, the most efficient way to calibrate said option without losing patience.

Likewise, it is possible that when activating or calibrating, you will not find the right options at first, otherwise quite the opposite, it is in the button " advanced settings » .

How do I install and calibrate the gyroscope if my device does not have this option?

If your mobile device does not offer you support for this function , don't worry, there is a solution. Here we will leave you a step by step to install and calibrate the gyroscope inside your device:

To get started, you need to create a plain text document (.txt) to the inside your PC on which you will put the name: "Android.hardware.sensor.gyroscope.xml" (without quotes). After that, inside you will place the following:

<? xml version = »1.0? encoding = "utf-8 ??>

All you have to do is connect your phone to your PC, this must be done via a USB cable . When you see the option to use it, tap on the mass storage option.
Now take the file you just created and copy it and paste it in the following path "System / etc / permissions".
Once the previous step has been completed, all you have to do is disconnect your mobile from your computer and search for the file. Once you find it, open the file.
Enter the section » octal "And write" rw-rr- To the interior, in incoming have the number 644 . If you cannot do this, you must give the file permissions " Writing «. And repeat the process.