How to change the attributes of a read-only hard drive in Windows
Sometimes we cannot store files on our hard drive due to a change in the permissions of the unit. In these cases, proper access to the drive is essential to change its attributes. We recommend that you read this article with which you will learn how to change the attributes of a read-only hard drive in Windows
What is the read-only attribute?
The read-only attribute is a feature that Windows assigns to files and drives. There is also read-only ROMs to write binary information and other hardware components with this attribute. As a result, when a drive is "read-only", it means that it can be opened and read but cannot be edited, deleted or renamed.
What is the Diskpart command?
Diskpart is a utility that we can run on Windows for disk management . Diskpart works as an advanced management tool and consists of a series of commands that allow you to list disks, partitions and volumes.
All functions performed by Diskpart require the command prompt . Therefore, this command cannot be used from the classic Windows interface. However, Apple users can also change the permissions of a hard drive on a Mac by using the options offered by the same ios system.
How to change the attributes of a read-only hard drive in Windows
If deseas cambiar los atributos de un disco duro de solo lectura, es essential that ejecutes una serie de pasos enfocados en la modification of the propiedades del disco mediate the interfaz del Windows sistema oa través del uso of the consola de commandos para este operating system.
Make sure you are logged in as an "Administrator" user
First of all, you need to connect to your PC using a administrator account . In this way, you will be able to access permissions and modify hard drive attributes without any hindrance or limitation.
Enter hard drive properties
One way to change the attributes of a read-only hard drive is to access the properties of this component . To do this, go to "This Computer" and locate the local hard drive where you want to change its attributes.
Change the attributes of the read-only hard drive
Press the right mouse button and click on "Properties". You will see a new window identified as "Local disk properties" . There you need to locate and click on the "Security" tab at the top.
Press the "Edit" button and, in the new edit window, uncheck the "Play" box. Then click on "Apply" and "OK". In this way, you will be able to change the hard drive attributes from Windows as an administrator user.
Enter the Windows command console
Do you know what it is, what it is for and how to use the CMD command prompt? If so, take advantage of this alternative to change the attributes of a read-only hard drive in Windows. First, go to the command console, type "cmd" without quotes in the search box (the magnifying glass icon) which you will find in the taskbar.
Then right click on “Command Prompt” and click on “Run as administrator”. Therefore, a new window will open corresponding to the Windows system control console.
Use command console to change attributes of read-only hard drive in Windows
It's time to use the commands to modify the attributes of your hard drive . To do this, type diskpart and press the "Enter" key. Wait a second while you access the tool.
Then type list disk and press "Enter". With this command, you will be able to see the list of disks on your PC. Each of them is identified as "Disk #" or "Disk #» . Select disk 0 using the command "select disk 0" (without quotes). You will see the message "Disk 0 is now the selected disk".
Check and change attributes of cmd
Type the command "attribute disk" and press the "Enter" key. With this declaration you will be able to check hard drive attributes . Then type "attributes disk clear readonly" and press "Enter". The system will display the message “The attributes of the drive were successfully deleted”.
Finally, type "To leave" and press the "Enter" key to exit and close the Windows system control console.
