How to change Windows 10 screen refresh rate settings?
Changing the Windows 10 screen refresh rate setting allows the image du monitor to appear sharper.
Besides allowing the system image to be updated more times, it means an improvement in the image and it is visually more comfortable for people.
Having said that, having the monitor set to 60 hertz causes the image to be refreshed 60 times per second. In this way, people obsessed with a better image get involved in every way possible in perfecting that statistic.
Thus, in some cases, users install new video hardware and this does not allow this setting to be configured. If this is your case, then it is best if you read on and follow the recommendations below.
No matter the version of Windows 10 that you have, you can do it to anyone without a problem.
Change screen refresh rate from display settings
This parameter is obtained from the screen configuration Windows , which is reached by clicking on any section of the desktop. Then several options will be displayed in a sort of white box, at the bottom will be the option " Screen settings «.
This action will expose a pop-up settings window, consisting of a sidebar (on the left) and an options section (on the right). In the second section mentioned above, at the bottom, there will be an alternative in blue letters that says " Advanced display settings ».
By selecting this option, another separate window will appear with the screen monitor features linked to the user's computer.
do not forget to troubleshoot monitor: signal out of range on Windows to avoid slowing down the process, if necessary.
At the end of it, there will be an alternative called " Display the properties of graphics card 1 “, Which must be chosen. This will give access to a small window with three tabs which concern the information of the graphics card or the video driver.
You must go to the tab " Monitor »Where you will find two options, one for displaying the properties of the monitor and one for» Monitor settings «.
In the second, there is an items bar which, when selected, will display a list of the available frequencies that the screen has. To change the display configuration frequency, only one of these options must be selected (preferably the highest) and the " OK » given to finish.
The screen refresh rate list doesn't show me any other options
It is possible that after doing the whole process, they manage that in this configuration list it is not possible to change the update frequency lack of options . This is not necessarily a mistake, as many low-end video controllers don't have greatly varying frequency settings.
It is also likely that you do not have any video peripheral hardware installed in the computer, so it is governed by that built into the motherboard. This is only fixed by looking for a video card that allows for a larger list of frequencies that can be assigned or configured.
Also, another reason why this happens is if the cable used does not collect enough information about the device.
This is because it is standard or generic wiring such as displayport. Which is easily fixed, using high resolution.
Importance of screen refresh rate
This type of change was much more relevant for older monitors, where low values resulted in jumps in the image.
More the bug has been fixed over time , placing a higher frequency floor, so this will not be noticeable on today's high-tech displays.
However, it is possible to remove the automatic update screen from Windows 10 so as not to frequently see those related to the screen, but this is not recommended.
In this sense, one might think that it does not matter that the frequency is as low as possible, but this statement is not necessarily true. The new frequencies that the instructors bring today have a big visual difference compared to 60 hertz, noticing the difference even during mouse movement.
